ESP32-WROVER is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications,ranging from low-power sensor networks to the most demanding tasks,such as voice encoding,music streaming and MP3 decoding.

E103-W11 is a cost-effective serial to Wi-Fi module, small size package, working in the 2.4~2.4835GHz frequency band. The module can use the serial port to send and receive data, which reduces the threshold for wireless applications.

E103-W20 (7628) module is a low-cost and low-power IoT module based on MediaTek MT7688AN and MT7628AN. This module leads to all interfaces of MT7688AN/MT7628AN, supports OpenWrt operating system and custom development

E103-W02X is an ultra-low power serial to Wi-Fi module based on TI's CC3200 chip in an SMD small form factor package with a PCB antenna, operating in the 2.4~2.484GHz band. The module can use the serial port to send and receive data, lowering the threshold of wireless applications.

E103-W04 is a high-performance and highly reliable WiFi data transmission module, that integrates the transparent transmission function, which can be used immediately, and can realize serial port (TTL) data through WiFi.

E33-433T13D is embedded in a high-speed low-power microcontroller and a high-performance chip SX1212. The transmission power is 20mW, and only 3.0mA is consumed in the receiving state.

E32-900T20D is a wireless serial port module (UART) based on SEMTECH's SX1276RF chip. It has multiple transmission modes, working in the 862MHz~931MHz, LoRa spread spectrum technology, TTL output.

E330-900T13S is a small size, low power consumption, low-cost ultra-high cost-effective wireless serial port module, integrated transceiver, covering 868, 900MHz frequency band.

E70-400M14S1B adopts CC1312R RF chip originally imported from Texas Instruments (TI), which integrates a single-chip microcomputer and wireless transceiver and adopts 48MHz industrial-grade high-precision low-temperature drift crystal oscillator to ensure its industrial characteristics and stable performance.

E30T-433T20S is a high temperature wireless serial port module (UART) ,half duplex, integrated transceiver, transparent transmission, SMD type, TTL level output, working frequency band 4 25 ~ 4 50.5MHz .

E73-2G4M08S1CX is wireless Bluetooth module designed by Chengdu Ebyte which feature small size, low power consumption. It adopt the originally imported RFIC nRF52840 of NORDIC, supporting BLE 4.2 and BLE 5.0.

E72-2G4M02S2B is a small size (1.27mm between pins) SMD type 2.4GHz RF module designed by Chengdu Ebyte, its maximum transmitting power is 2dBm, with high performance PCB antenna.

E104-BT5032U is a small USB interface Bluetooth wireless packet capture tool produced by Ebyte, with a high-performance PCB on-board antenna and Bluetooth low energy (BLE) SOC scheme, adopts Nordic's original imported nRF52832 RF chip, which supports Bluetooth 4.2 and Bluetooth 5.0.

E104-BT12SP Bluetooth mesh ad hoc network module supports the sig mesh V1.0 standard, and a single network can accommodate up to 16383 node devices in theory. After the device is connected to the network, the network information is automatically memorized, and the network connection time is completed within 1 second.

E104-BT53C3 is a serial-to-BLE Bluetooth module based on Bluetooth protocol version 5.2. It has the characteristics of high temperature resistance, small size, low power consumption, long transmission distance, and strong anti-interference ability. It works in the 2.4GHz frequency band.

Link72(E72-2G4M20S1E )is a ZigBee3.0 ad hoc network wireless module based on CC2652P produced by TI as the core and independently developed by Ebyte.It integrates ARM microcontroller and high-performance wireless transceiver inside.

E180-Z8910SX is a ZIGBEE3.0 module designed and produced by Chengdu Ebyte based on NXP JN5189 wireless SOC. It has a small size, low power consumption, high reliability, and works in the 2.4GHz frequency band. It has an ARM architecture, M4 core, and a clock frequency of up to 48MHZ.

E18-MS1PA2-IPX is small-sized 2.4GHz ZigBee wireless module, which is designed and produced by Chengdu Ebyte. SMD type, IPEX interface, with a transmission power of 100mW and the pin pitch is 1.27mm. It is applicable for various applications (especially smart home).

E18-MS1-PCB is based on original imported RF chip CC2530 form TI in American. The IC chip is integrated with 8051 microcontroller and wireless transceiver inside, which is applicable to Zigbee design and 2.4GHz IEEE 802.15.4 protocol. All the IO ports are led out by the module, which means that multi-aspect development is realizable.

E180-ZG120B is a small, low-power, high-reliability, 2.4GHz ZIGBEE module based on Silicon Labs EFR32MG1B. The chip comes with high-performance 32-bit ARM Cortex. -M4 core, integrated internal power amplifier, transmit power up to 20dBm.

Full Duplex LoRaWAN Gateway

E880-IR01 is a 4G wireless router, which provides a fast networking and mobile network sharing solution for user equipment. The device adopts the industry's commercial-grade high-performance embedded structure, It supports wired WAN ports, LAN ports, WLAN networks, and 4G Network interface, SMS AT command remote control 4G router.

NB124 is an industrial-grade 2-way serial port server that supports DC power supply isolation. It integrates the TCP/IP protocol stack inside, which can realize two-way transparent transmission of data from the 2-way serial port to the Ethernet port.

ECAN-U01 is a high-performance CAN-bus communication analyzer with an integrated 2 - way CAN interface, compatible with the USB2.0 bus full-speed specification,and the PC terminal can be quickly connected to the CAN-bus network.

E870-E0 edge computing acquisition gateway is an Ethernet device, supports TCP client protocol and MQTT Access. adopts industrial-grade design standards to ensure high reliability of equipment.

E851-RTU(4440-ETH) is a network IO product that supports 4-channel digital input (default dry contact), 4-channel differential analog input, and 4-channel relay output. Support Modbus TCP/RTU protocol .

ME31-XXXA0006 is a network I/O networking module with 6 analog outputs (0-20mA/4-20mA), supports Modbus TCP protocol or Modbus RTU protocol for acquisition control.

NB183 integrates the TCP/IP protocol stack, which can realize two-way transparent transmission of data from serial port to Ethernet port, Modbus protocol conversion, serial port device cloud and other functions.

MA01 -XXCX0080 is a supporting configuration software or PLC, through the serial port (RS485) issuedinstructions to control the 8 relay switch output (DO), to achieve remote control function of the serial I/O networking module.

ME31-XAXA0404 is available with 4 analog outputs (0-20mA/4-20mA) and 4 analog (0-20mA/4-20mA) inputs and supports Modbus. The TCP protocol or Modbus RTU protocol performs acquisition control.

E95-DTU(900SL30-485) is a wireless data transmission DTU that uses military-grade LoRa modulation technology It has a variety of transmission methods.

E180-DTU (Z20-485) is a wireless data transmission station based on ZigBee3.0 technology, with multiple functions such as transparent transmission and protocol transmission.

E18-DTU (Z27-485) is a wireless data transmission station based on ZigBee3.0 technology, with multiple functions such as transparent transmission and protocol transmission. It can be connected with data terminals such as PLC, RTU, rain gauge, and liquid level gauge.

E840-DTU(NB-02) can realize the communication between the serial port device and network server via the NB network. With simple AT commands, users can easily use this product to achieve bidirectional transparent data transmission from the serial port to the network.

Designed for the communication between UART and net server via GPRS, it is with easy AT setting and dual transparent transmission available.